Five rules to follow with root-cause analysis
Five rules to follow with root-cause analysis
The five rules of causation are designed to improve the root-cause analysis (RCA) process by creating minimum standards for where an investigation and the results should be documented. The rules are created in response to the very real biases we all bring to the investigation process.
The VA National Patient Safety Center offers these rules to guide the process of RCA:
• Rule 1 — Causal statements must clearly show the "cause-and-effect" relationship.
This is the simplest of the rules. When describing why an event has occurred, you should show the link between the root cause and the bad outcome, and each link should be clear to the RCA team or others. Focus on showing the link from your root cause to the undesirable patient outcome you are investigating. Even a statement such as "resident was fatigued" is deficient without your description of how and why this led to a slip or mistake. The bottom line: The reader needs to understand your logic in linking your causes to the outcome.
• Rule 2 — Negative descriptors (e.g., poorly, inadequate) are not used in causal statements.
As humans, we try to make each job we have as easy as possible. Unfortunately, this human tendency works its way into the documentation process. We may shorten our findings by saying "maintenance manual was poorly written" when we really have a much more detailed explanation in our mind. To force clear cause-and-effect descriptions (and avoid inflammatory statements), we recommend against the use of any negative descriptor that is merely the placeholder for a more accurate, clear description. Even words like "carelessness" and "complacency" are bad choices because they are broad, negative judgments that do little to describe the actual conditions or behaviors that led to the mishap.
• Rule 3 — Each human error must have a preceding cause. Most of our mishaps involve at least one human error. Unfortunately, the discovery that a human has erred does little to aid the prevention process. You must investigate to determine WHY the human error occurred. It can be a system-induced error (e.g., step not included in medical procedure) or an at-risk behavior (doing task by memory instead of a checklist). For every human error in your causal chain, you must have a corresponding cause. It is the cause of the error, not the error itself, which leads us to productive prevention strategies.
• Rule 4 — Each procedural deviation must have a preceding cause. Procedural violations are like errors in that they are not directly manageable. Instead, it is the cause of the procedural violation that we can manage. If a clinician is violating a procedure because it is the local norm, we will have to address the incentives that created the norm. If a technician is missing steps in a procedure because he or she is not aware of the formal checklist, work on education.
• Rule 5 — Failure to act is only causal when there was a pre-existing duty to act. We can all find ways in which our investigated mishap would not have occurred — but this is not the purpose of causal investigation. Instead, we need to find out why this mishap occurred in our system as it is designed today. A doctor's failure to prescribe a medication can only be causal if he or she was required to prescribe the medication in the first place. The duty to perform may arise from standards and guidelines for practice or other duties to provide patient care.
The five rules of causation are designed to improve the root-cause analysis (RCA) process by creating minimum standards for where an investigation and the results should be documented.Subscribe Now for Access
You have reached your article limit for the month. We hope you found our articles both enjoyable and insightful. For information on new subscriptions, product trials, alternative billing arrangements or group and site discounts please call 800-688-2421. We look forward to having you as a long-term member of the Relias Media community.